18000mAh Car Jump Starter is a Multi-Function Emergency Power Support All Gasoline Vehicles
Comes with Memorry Saver OBD Cable.it will be a convenient way, should you not have jump starter (or Lead-acid battery) on hand, and the device can also get the 12v power supply from cigarette lighter of another good car. Just insert the Cigarette lighter plug to this car and insert into 16 pin plug to the OBD port of the car you want to replace battery. And now you can replace the battery.
** What should you do if your drop anchor on the highway or can't start in the cold weather?
** What should you do if your mobile no power when you are out of door?
** What should you do if your laptop no power when you are negotiating customer about a big order?
Don't worry right now, my mini portable jump starter can solve your emergency issue.
To avoid cause accidents, make sure note the following cautions:
1. Take off the main unit within 30 seconds after starting the car.
2. Don't clip the two terminals at the same end on the battery.
3. Don't Disassemble the unit!
AUTO Emergency Start Power Product Highlights:
* The smallest and lightest portable power with patented technology in the current market.
* Use high capacity high power polymer cells, fast charging and low self-discharge, cycles can reach 1000 times.
* Support 12V car for emergency start, portable illumination and various mobile phone, PSP, MP3/MP4.
* Pocket PC PDA, notebook as well as other products charge / power supply.
* Multiple safety protection design to ensure the product has zero defect.
AUTO Emergency Start Power Instructions for use:
1, Select the appropriate voltage and connector for the electronic device to charge / power supply
2, Press the switch to start charging when your device connected with EPOWER; If you unplug the cable, auto-sleep will start in one minute.
3, Five lights will flash circularly during the charging by EPOWER and all lights will keep bright when your device is full-charged.
4, During the charging for your device, LED lights indicate the balance power of built-in battery of EPOWER. Four lights indicate 80% balance, three lights indicate
60% balance, two lights indicate 40% balance and one light indicates 20% balance. The built-in battery is empty when all LED lights start to flash.
5, Press the switch five seconds to start If you want to use LED for illumination and select the status ( light, strobe, SOS, close) by pressing the switch to transform.
6, Store the product in a cool and dry place and away direct sunlight.
AUTO Emergency Start Power Special note:
To start 12V car, please make sure at least two LED lights of EPOWER are bright firstly, then connect the red battery clip to the battery positive (+) and black clip to
the battery negative (-) and insert the plug into the EPOWER, finally turn the ignition switch to the START position. Once the car is started, please disconnect the
plug and remove the battery clips immediately.
Correct operation flow for auto start:
Scan ECUTOOL QR code to order by mobile phone
Live Support: Chat with us online
Common Questions: firstname.lastname@example.org
Technical Support: email@example.com
Ask A Question: You can go to your member centre and submit your questions.
If you are not satisfied with our customer service staff, please send email to firstname.lastname@example.org.